Rated 5 Stars on GoogleRead Our Reviews
    Real Local Projects

    Recent Garage Door Projects in North Dallas

    Documented case studies of real garage door repairs and installations completed by our team across Richardson, Plano, Dallas, Carrollton, and Garland.

    Lift cable and roller replacement on insulated steel double garage door in Carrollton TX
    Cable & Roller Repair

    Lift Cable and Roller Replacement in Carrollton TX

    Carrollton, TX
    Customer problem
    Right lift cable frayed and slipped off the drum. Door hung crooked and would not close evenly. Rollers were original builder-grade plastic and noisy.
    Technician diagnosis
    Frayed right lift cable slipped the drum; original builder-grade plastic rollers worn throughout.
    Solution performed
    Replaced both lift cables as a matched pair with 7x19 aircraft-grade galvanized cable and all ten rollers with 13-ball sealed-bearing nylon rollers.
    Parts installed
    7x19 aircraft-grade galvanized lift cables (matched pair) · 13-ball sealed-bearing nylon rollers (qty 10)
    Equipment
    Door: 16' insulated steel sectional double door
    Replaced torsion spring on insulated double garage door in Canyon Creek, Richardson TX
    Broken Spring Repair

    Broken Spring Replacement in Canyon Creek, Richardson TX

    Canyon Creek — Richardson, TX
    Customer problem
    Homeowner heard a loud bang from the garage overnight. The next morning the door would not open and the opener strained against the dead weight of an unsprung door. Builder-grade 10,000-cycle torsion spring had snapped near the winding cone.
    Technician diagnosis
    Snapped 10,000-cycle builder-grade torsion spring near the winding cone, door unbalanced.
    Solution performed
    Replaced with an oil-tempered 25,000-cycle torsion spring sized to door weight, rebalanced and safety-tested.
    Parts installed
    25,000-cycle oil-tempered torsion spring · Replacement winding cones and bearing plates as needed
    Equipment
    Door: 16' insulated steel sectional double door
    Commercial overhead door repair at warehouse loading bay in Garland TX
    Commercial Overhead Doors

    Commercial Overhead Door Repair at a Garland TX Warehouse

    Garland, TX
    Customer problem
    Light-industrial tenant could not get product to the loading bay — door would only lift two feet before binding. Tracks were bent at the curve from a forklift bump and rollers were worn.
    Technician diagnosis
    Bent horizontal track sections at the curve (forklift impact) plus worn high-cycle rollers caused the door to bind two feet up.
    Solution performed
    Replaced damaged horizontal track sections to factory radius, swapped all rollers for commercial 7-ball steel rollers, and serviced the chain hoist.
    Parts installed
    Replacement commercial horizontal track sections (factory radius) · Commercial-grade 7-ball steel rollers, high-cycle · Chain hoist sprocket service and re-tension
    Equipment
    Door: 12' x 14' sectional commercial overhead door with chain hoist
    LiftMaster 8500W wall-mount jackshaft opener installation in West Plano TX
    Opener Repair & Installation

    LiftMaster 8500W Opener Replacement in West Plano TX

    West Plano — Plano, TX
    Customer problem
    A thunderstorm power surge took out the logic board on a 12-year-old chain-drive opener. Homeowner wanted a quieter, ceiling-free option compatible with the existing torsion shaft.
    Technician diagnosis
    Fried logic board on aging chain-drive opener following a North Texas thunderstorm surge.
    Solution performed
    Installed a LiftMaster 8500W wall-mount jackshaft opener on the existing torsion shaft with MyQ and integrated lock.
    Parts installed
    LiftMaster 8500W wall-mount jackshaft opener · LiftMaster cable-tension monitor · Integrated automatic deadbolt lock
    Equipment
    Brand: LiftMaster · Door: 16' insulated steel sectional double door
    Off-track garage door realignment on insulated single door in Richardson Heights TX
    Off-Track Repair

    Off-Track Garage Door Realignment in Richardson Heights TX

    Richardson Heights — Richardson, TX
    Customer problem
    Door jumped the left vertical track after a roller stem snapped mid-cycle. Door was stuck at an angle, blocking the homeowner's vehicle.
    Technician diagnosis
    Snapped roller stem caused the door to jump the left vertical track and bind at an angle.
    Solution performed
    Secured the door, replaced four worn rollers with sealed-bearing nylon rollers, re-seated both tracks, and rebalanced.
    Parts installed
    Sealed-bearing nylon rollers (qty 4 replaced) · Replacement vertical track hardware as needed
    Equipment
    Door: 9' insulated steel sectional single door
    Custom cedar overlay garage door installation in North Dallas TX
    Garage Door Installation

    Custom Cedar Overlay Garage Door Install in North Dallas TX

    North Dallas — Dallas, TX
    Customer problem
    Owner of a transitional-modern home wanted a warm cedar facade to replace a flat steel door without losing the insulation and rigidity of a modern sectional system.
    Technician diagnosis
    Existing flat steel door did not match the home's transitional architecture; full custom cedar facade required without sacrificing insulation.
    Solution performed
    Built and installed a kiln-dried clear-cedar overlay over a new insulated steel base door, with iron strap hardware and re-sized torsion springs.
    Parts installed
    Insulated steel base sectional door · Shop-built kiln-dried clear cedar overlay panels · Iron strap hardware and matching handles
    Equipment
    Door: Insulated steel base door with custom cedar overlay and iron strap hardware

    Showing 6 of 6 projects. Categories: Broken Spring Repair · Opener Repair & Installation · Off-Track Repair · Cable & Roller Repair · Garage Door Installation · Commercial Overhead Doors.